Basic Operations
∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.
∗When you have entered a title in a CD, it appears in the sub display. If you have not entered a title,
Setting the Z-enhancer
This unit comes with three types of sound tone effects stored in memory. Select the one you prefer.
∗The factory default setting is
•
•
•
•
Adjusting the tone
Press
●When the
●When Z-enhancer 1, 2, or 3 is set
“NON-FAD VOL” ➜ “Z-EHCR” ➜ “BALANCE”
➜“FADER” ➜ Function mode...
Note:
•When the
Adjusting the non-fader output volume
You can adjust the volume output from the unit’s
1.Press
2.Turning the Rotary knob & clockwise increases the output volume; turning it counterclockwise decreases the output volume.
∗ The factory default setting is “4”. (Setting range: 0 to 7)
3.When the adjustment is complete, press
Setting tone bypass
The tone bypass disables the tone (bass and treble) functions and cuts the noise generated when the tone functions are on.
1.Press
2.Turning the Rotary knob & clockwise sets the tone bypass to “YES” (ON); turning it counterclockwise sets the tone bypass to “NO” (OFF).
∗The factory default setting is “NO” (OFF).
∗If the setting is “YES” (ON), the bass and treble adjustments cannot be made.
3.When the adjustment is complete, press
Note:
•If you set the
Adjusting the bass
1.Press
2.Turning the Rotary knob & clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.
∗The factory default setting is “0”. (Adjustment range:
∗The bass cannot be adjusted if the tone by- pass setting is “YES” (ON).
3.When the adjustment is complete, press
Adjusting the treble
1.Press
2.Turning the Rotary knob & clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.
∗The factory default setting is “0”. (Adjustment range:
∗The treble cannot be adjusted if the tone by- pass setting is “YES” (ON).
3.When the adjustment is complete, press
DRX8575z 11