Transition Networks MIL-SM802GAF user manual Port Commands Set, Portid, full half, 101001000auto

Port Commands Set

Commands	Level	Description	Example
interface fastEthernet	G	Choose the port for	switch(config)#interface
[Portid]		modification.	fastEthernet 2
duplex	I	Use the duplex	switch(config)#interface
[full half]		configuration	fastEthernet 2
		command to specify	switch(config-if)#duplex full
		the duplex mode of
		operation for Fast
		Ethernet.
speed	I	Use the speed	switch(config)#interface
[101001000auto]		configuration	fastEthernet 2
		command to specify	switch(config-if)#speed 100
		the speed mode of
		operation for Fast
		Ethernet., the speed
		can’t be set to 1000 if
		the port isn’t a giga
		port..
no flowcontrol	I	Disable flow control of	switch(config-if)#no flowcontrol
		interface
security enable	I	Enable security of	switch(config)#interface
		interface	fastEthernet 2
			switch(config-if)#security enable
no security	I	Disable security of	switch(config)#interface
		interface	fastEthernet 2
			switch(config-if)#no security
bandwidth type all	I	Set interface ingress	switch(config)#interface
		limit frame type to	fastEthernet 2
		‘accept all frame’	switch(config-if)#bandwidth type
			all

25