Transition Networks MIL-SM802GAF, MIL-SM8TXAF2GPA user manual Set interface ingress

bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast-floo		limit frame type to	fastEthernet 2
ded-unicast		‘accept broadcast,	switch(config-if)#bandwidth type
		multicast, and flooded	broadcast-multicast-flooded-uni
		unicast frame’	cast
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-multicast		limit frame type to	fastEthernet 2
		‘accept broadcast and	switch(config-if)#bandwidth type
		multicast frame’	broadcast-multicast
bandwidth type	I	Set interface ingress	switch(config)#interface
broadcast-only		limit frame type to ‘only	fastEthernet 2
		accept broadcast	switch(config-if)#bandwidth type
		frame’	broadcast-only
bandwidth in	I	Set interface input	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth in 100
		kbps to 102400 kbps
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
bandwidth out		Set interface output	switch(config)#interface
[Value]		bandwidth. Rate	fastEthernet 2
		Range is from 100	switch(config-if)#bandwidth out
		kbps to 102400 kbps	100
		or to 256000 kbps for
		giga ports,
		and zero means no
		limit.
show bandwidth	I	Show interfaces	switch(config)#interface
		bandwidth control	fastEthernet 2
			switch(config-if)#show bandwidth

26