Transition Networks MIL-SM802GAF user manual Desktop Installation, Power On, Attaching Rubber Pads

Frequency of 50-60Hz, or work with DC 48V which is the redundant power supply for the

switch.

The Rear Panel of the 8 10/100TX + 2 Gigabit copper/ MINI GBIC Combo with 8 PoE Injector Managed Switch

(MIL-SM8TXAF2GPA)

Desktop Installation

Set the switch on a sufficiently large flat space with a power outlet nearby. The surface where you put the switch should be clean, smooth, level and sturdy. Make sure there is enough clearance around the switch to allow attachment of cables, power cord and allow air circulation.

Attaching Rubber Pads

A.Make sure mounting surface on the bottom of the switch is grease and dust free.

B.Remove adhesive backing from your Rubber Pads.

C.Apply the Rubber Pads to each corner on the bottom of the switch. These footpads can prevent the switch from shock/vibration.

Power On

Connect the power cord to the power socket on the rear panel of the switch. The other side of power cord connects to the power outlet. The internal power supply of the switch works with voltage range of AC in the 100-240VAC/ Frequency of 50~60Hz, or the redundant power of DC 48V for 8 10/100TX + 2 Gigabit copper/Mini-GBIC Combo with 8 PoE Injectors Managed Switch. Check the power indicator on the front panel to see if power is properly supplied.

13