Manuals / Transition Networks / Computer Equipment / Switch

Transition Networks MIL-SM8TXAF2GPA, MIL-SM802GAF user manual

Models: 8 10/100TX 1 10/100/1000T/10/100 SFP Combo with 4 PoE Injectors Managed Switch, 8 10/100TX 2 Gigabit Copper/SFP Combo with 8 PoE Injectors Managed Switch MIL-SM8TXAF2GPA MIL-SM802GAF

1 118

Download 118 pages 48.8 Kb

Page 16

RJ-45 Ports: 8 x 10/100 N-way auto-sensing for 10Base-T or 100Base-TX connections. Ports 1 ~ 4 are general 10/100Base-TX Ethernet ports; Ports 5 ~ 8 are for Data in/out and Power out.

RJ-45 Ports: 8 x 10/100 N-way auto-sensing for 10Base-T or 100Base-TX connections. Ports 1 ~ 4 are general 10/100Base-TX Ethernet ports; Ports 5 ~ 8 are for Data in/out and Power out.

In general, MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX would allow the unit to connect to another switch or workstation without changing non-crossover or crossover cabling.

1 Giga port: 1 x 10/100/1000TX N-Way auto-sensing for 10/100/1000 connection.

1 Mini-GBIC (SFP) port: 1 mini-GBIC port for Gigabit fiber connection (100/1000).

The front panel of the 8 10/100TX + 2 Gigabit copper/Mini-GBIC Combo with 8 PoE Injectors Managed Switch consists of 8 x 10/100Base-TX RJ-45 Ethernet ports (Auto MDI/MDIX), 2 Giga port and 2 Mini-GBIC ports. The LED Indicators are also located on the front panel of the switch.

The Front panel of the 8 10/100TX + 2 Gigabit copper/Mini-GBIC Combo with 8 PoE Injectors Managed

Switch

RJ-45 Ports: 8 x 10/100 N-way auto-sensing for 10Base-T or 100Base-TX connections. Moreover, these ports also supply power for PDs.

In general, MDI means connecting to another Hub or Switch while MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX would allow connecting to another switch or workstation without changing non-crossover or crossover cabling.

2 Gigabit Ethernet port: 2 x 10/100/1000TX N-Way auto-sensing for 10/100/1000 connection.

2 Mini-GBIC port: 2 mini-GBIC ports for Gigabit or 100M fiber connection.

9

Image 16

Transition Networks MIL-SM8TXAF2GPA, MIL-SM802GAF user manual

Contents

MIL-SM802GAF MIL-SM8TXAF2GPA User Manual4 PoE Injectors Managed Switch 8 10/100TX + 1 10/100/1000T/10/100 SFP Combo withRegulatory Approval FCC Class A UL CSA C22.2 No EN60950 CE FCC Warning CE Mark WarningContents IntroductionHardware Description Network ApplicationWeb-Based Management X-Ring Technical Specification TroubleshootingAppendix Introduction Features Provide redundant backup feature and the recovery time below 300ms Device cold start Authentication failure X-ring topology changedTFTP Firmware Update and System Configure Restore and Backup Spanning Tree Support IEEE802.1d Spanning TreeSoftware Feature IGMP query mode access the switch management to preventSupports IEEE802.1x User Authentication and can AuthenticationSupports System log record and remote system System log log server Package Contents 1 RS-232 cableHardware Description Physical DimensionFront Panel RJ-45 Ports 8 x 10/100 N-way auto-sensing for 10Base-T or 100Base-TX connections. Ports 1 ~ 4 are general 10/100Base-TX Ethernet ports Ports 5 ~ 8 are for Data in/out and Power out LED Indicators MIL-SM8TXAF2GPAMIL-SM802GAF Rear Panel Switch MIL-SM802GAFPower On Desktop InstallationAttaching Rubber Pads Network Application Small Workgroup Power over Ethernet Switch network applicationSegment Bridge Small Workgroup applicationSegment Bridge application Login in the Console Interface Console ManagementCLI Management Console login screenCommands Level CLI command interfaceEXEC mode Save configurationconfigure Use this mode toCommands Set List System Commands Setshow config show terminalip dhcp IP address Port Commands Set Portidfull half 101001000autoSet interface ingress Trunk Commands Set Enable Disable1~65535 Group IDwith LACP active VLAN Commands Set port belong to a trunk 0~61440 Spanning Tree Commands Setseconds forward-time seconds stp-path-cost1~200000000 stp-path-priorityQOS Commands Set stp-admin-p2pstp-admin-edge stp-admin-non-stpIGMP Commands Set Mac / Filter Table Commands SetPrioritylowestlowmid dlehighSNMP Commands Set Select the agent mode Configure the mibview Port Mirroring Commands Set 802.1x Commands Set8021x enable 8021x system radiusip8021x system serverport 8021x systemUse the 802.1x misc TFTP Commands Set backupflashbackupcfg restore flashrestorecfgSystemLog, SMTP and Event Commands Set SNTP Commands Set sntp daylight sntp daylight-periodStart time End time sntp daylight-offsetX-ring Commands Set System Login Web-Based ManagementAbout Web-based Management Preparing for Web ManagementSystem Information IP Configuration DHCP Configuration DHCP Server Configuration Port and IP Bindings DHCP Client EntriesDHCP Client Entries interface TFTP - Update Firmware Update Firmware interfaceTFTP Server IP Address Key in the TFTP server IP Firmware File Name The name of firmware imageTFTP - Restore Configuration TFTP - Backup ConfigurationSystem Event Log Configuration System Log Configuration interfaceReload ClearSystem Event Log - SMTP Configuration System Event Log - Event Configuration SMTP Configuration interfaceproduce a log event SNTP Configuration PDT - Pacific Daylight PST - Pacific Standard8 hours 4 amSNTP Configuration interface IP Security User Authentication 1. User name Key in the new user name The default is ‘root’2. Password Key in the new password The default is ‘root’ 3. Confirm password Re-type the new passwordPort Statistics Port Statistics interfacePort Control Port Trunk Port Trunk - Aggregator settingPort Trunk-Aggregator Setting interface Port Trunk - Aggregator InformationDelete DeletePort Trunk - State Activity Port Mirroring Rate Limiting VLAN configuration VLAN configuration - Port-based VLAN VLAN Configuration interfaceClick to add a new VLAN group The maximum VLAN group is up toVLAN groups And then, clickYou will see the VLAN displays Use Delete button to delete unwanted VLANbutton to modify existing VLAN group VLAN-Port Based Add interface802.1Q VLAN 802.1Q Configuration Group Configuration Group Configuration interface4. Untagged VID Assign the untagged frame VID 5. Tagged VID Assign the tagged frame VIDRapid Spanning Tree RSTP - System ConfigurationRSTP System Configuration interface RSTP - Port Configuration SNMP Configuration System Configuration1. String Fill the name of string Trap Configuration SNMPV3 ConfigurationConfigure the SNMP V3 function Context Table SNMP V3 configuration interface Group Table Configure SNMP v3 group table QoS Configuration QoS Policy and Priority TypeQoS Configuration interface ruleClick ApplyIGMP Configuration COS ConfigurationTOS Configuration Port Base PriorityA message sent from the querier IGMP router or switch IGMP Protocol Enable or disable the IGMP protocolMessage DescriptionIGMP Configuration interface X-Ring And then, click Security 802.1X/Radius Configuration802.1x Per Port Configuration Misc Configuration 802.1x Per Port Setting interfaceMAC Address Table Static MAC AddressMAC Filtering 3. Clickand click DeleteAll MAC Addresses All MAC Address interface Power over Ethernet Factory Default ResetSave Configuration System RebootFactory Default interface Save Configuration interfaceTroubleshooting Incorrect connectionsDiagnosing LED Indicators Improper Network TopologiesTechnical Specification Full-duplex/Collision Orange, 8 10/100TX + 135Watts 8 PoE Injectors model Appendix Console Port Pin Assignments100BASE-TX/10BASE-T Pin Assignments Midspan/Endspan POE HUB/SWITCHRJ-45 Pin Assignment of non-802.3af standard PD with Pin out of POE Midspan Hub/Switch Pin MDI-X