Connect power, Set time and date, Turn on

1Open the battery compartment.

2Insert 2 x R6/UM-3/AA size batteries with correct polarity (+/-) as indicated.

3Close the battery compartment.

Connect power

Caution

•Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus.

•Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.

•Before connecting the AC power cord, ensure you have completed all other connections.

Note

•The type plate is located on the bottom of the main unit.

1Connect the AC power cord to the wall outlet.

1In standby mode, press and hold SET

TIME/PROG for 2 seconds. » [24 HR] begins to blink.

2Press OK/ to select the 12/24 hour format.

3Press SET TIME/PROG to conﬁrm. » The hour digits begin to blink.

4Press / to set the hour.

5Press SET TIME/PROG to conﬁrm. » The minute digits begin to blink.

6Repeat steps 4-5 to set the minute, year, month, and day.

Tip

•In 12 hour format, [MONTH--DAY] is displayed.

•in 24 hour format, [DAY--MONTH] is displayed.

1Press POWER.

»The unit switches to the last selected source.

1Press POWER again to switch the unit to standby mode.

»The time and date (if set) appear on the display panel.

10EN