Alto-Shaam AR-6G e l e c t ric a l, electrIcal GroUnDInG InstrUctIons, aVertIssement: Directives

e l e c t ric a l

An electrical wiring diagram is located under the access panel beneath the drip tray of the appliance. This appliance must be branch circuit protected with proper ampacities, in accordance with the wiring diagram located in the electrical compartment of the appliance. The appliance must be properly grounded in accordance with the National Electrical Code and applicable local codes.

I n s t a l l a tio n

Wire size for the main incoming power to the unit must match the minimum size listed in the specifications applicable to the specific appliance.

electrIcal

VOLTAGE	PHASE	CYCLE/HZ	AMPS	KW
120	1	60	5.83	0.7	NEMA 5-15P
					15A, 125V PLUG

Wire diagrams are located in the inside access panel of the unit..

D a n G e r

electrIcal GroUnDInG InstrUctIons:

This appliance is equipped with a three-pronged (grounding) plug for your protection against shock hazard and should be plugged directly into a properly grounded three-prong receptacle. Do not cut or remove the grounding prong from this plug.

DanGer

To avoid electrical shock, this appliance MUST be adequately grounded in accordance with local electrical codes or, in the absence of local codes, with the current edition of the National Electrical Code ANSI/ NFPA No. 70. In Canada, all electrical connections are to be made in accordance with CSA C22.1, Canadian Electrical Code Part 1 or local codes.

DanGer

aVertIssement: Directives

pour la prise de courant électrique Cet appareil est muni d'une fiche à trios branches (prise de Courant) afin de vous proéger des chocs et doit être branché Directemet dans un receptacle adequate de prise do courant À trios branches. II ne faut pas couper ou enlever une banche De cette fiche.

DanGer

ENSURE POWER SOURCE

MATCHES VOLTAGE STAMPED

ON APPLIANCE NAMEPLATE.

AR-6G Rotisserie Operation & Care Manual • 9