Alto-Shaam AR-6G manual bulb replacement instructions, c a U t I o n, s e rv ic e, B & C

bulb replacement instructions

To Replace Cavity Bulbs:
A	B & C

s e rv ic e

D

ARemove the four screws (SC-2352)holding the glass light cover (CL-26608)and gasket (GS-26609)in place, taking care to not let the glass cover fall into

the oven.

BPull bulb out

CPush replacement bulb

(LP-34213) in place

DRe-install glass cover and gasket, securing with four screws removed in step A.

c a U t I o n

The performance of this unit has been optimized using the factory provided bulbs. These bulbs should be replaced with an exact replacement or with a factory recommended replacement. These bulbs have been treated to resist breakage and must be replaced with similarly treated bulbs in order to maintain compliance with NSF standards. DO NOT over-tighten bulbs in their receptacles as this can cause damage to the bulb filament.

c a U t I o n

DO NOT hANDlE NEW BulB WITh

BARE hANDS. WhITE COTTON

GlOvES ShOulD BE WORN WhEN

REplACING BulBS.

To Replace Signage Bulbs:

ARemove the four screws (a: SC-28434)holding the lamp box cover (b:1007526)

BUnscrew bulb (c: LP-33598)to be replaced

CInstall replacement bulb (c)

DResecure lamp box cover (b) with the four screws (a) removed in step A.

c

a d

b

Part numbers and drawings are subject to change without notice..

refer to page 27 for the full view of the top assembly and part numbers.

AR-6G Rotisserie Operation & Care Manual • 29