Instructions for the user

5. DESCRIPTION OF CONTROLS

5.1 Front control panel

All the cooker controls and commands are on the front panel.

If the cooker is equipped with an electronic programmer, before using the

oven make sure that the symbol ; appears on the display. See paragraph “6.1 Clock adjustment”.

DESCRIPTION OF SYMBOLS

FRONT RIGHT BURNER

BACK RIGHT BURNER

BACK LEFT BURNER

FRONT LEFT BURNER

ELECTRIC OVEN THERMOSTAT

ELECTRIC OVEN FUNCTION KNOB

GAS OVEN

THERMOSTAT

OVEN LIGHT / ROTISSERIE / GRILL SWITCH

HOB BURNER COMMAND KNOB

The flame is lit by pressing the knob and turning it anticlockwise to minimum flame . To adjust the flame turn the knob between maximum () and minimum (). The burner goes out when the knob

is returned to the position .

ELECTRIC OVEN THERMOSTAT KNOB

(CERTAIN MODELS ONLY)

Selection of cooking temperature is carried out by turning the knob clockwise to the required temperature, between 50° and 260°C.

If the appliance has an electric oven, the warning light will come on when the oven is heating up. When it goes out it means that the required temperature has been reached. Regular flashing means that oven temperature is being constantly maintained at the programmed level.

15

Page 13
Image 13
Smeg FS60WHNG, FS61MFXLP Description of Controls, Front control panel, Description of Symbols, HOB Burner Command Knob