Husqvarna 436 LI, 536 LIXP manual KEY to Symbols, Symbols on the machine

Models: 536 LIXP 436 LI

1 44
Download 44 pages 57.99 Kb
Page 2
Image 2

KEY TO SYMBOLS

Symbols on the machine:

Translation of the original Swedish operating instruction.

WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others.

Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.

Always wear:

• Approved protective helmet

• Approved hearing protection

Protective goggles or a visor

This product is in accordance with applicable EC directives.

Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in the Technical data chapter and on the label.

WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.

Direction of rotation of the saw chain and maximum length of the guide bar.

Chain brake, activated (right) Chain brake, not activated (left)

Chain oil fill.

Environmental marking. Symbols on the product or its packaging indicate that this product cannot be handled as domestic waste. It must instead be submitted to an appropriate recycling station for the recovery of electrical and electronic equipment.

Direct current

Do not expose to rain.

Other symbols/decals on the machine refer to special certification requirements for certain markets.

Symbols on the battery and/or on the battery charger:

This product must be deposited at an appropriate recycling facility.

Li-ion

Fail-safe transformer

Use and store battery charger only indoors.

Double insulation

2 – English

Page 2
Image 2
Husqvarna 436 LI, 536 LIXP KEY to Symbols, Symbols on the machine, Symbols on the battery and/or on the battery charger