GENERAL SAFETY PRECAUTIONS

the saw chain. Third, the chain brake may be activated but if the bar is too close to you the brake might not have enough time to slow down and stop the chain before the chain saw hits you.

Only you and proper working technique can eliminate kickback and its danger.

Throttle lockout

The power trigger lockout is designed to prevent accidental operation of the power trigger. When you press the power trigger lockout (A) (i.e when you grasp the handle) it releases the power trigger (B). When you release the handle the power trigger and the power trigger lockout both move back to their original positions.

A

B

Chain catcher

The chain catcher is designed to catch the chain if it snaps or jumps off. This should not happen if the chain is properly tensioned (see instructions under the heading Assembly) and if the bar and chain are properly serviced and maintained (see instructions under the heading General working instructions).

Right hand guard

Apart from protecting your hand if the chain jumps or snaps, the right hand guard stops branches and twigs from interfering with your grip on the rear handle.

Vibrations

Cutting hardwoods (most broadleaf trees) creates more vibration than cutting softwoods (most conifers). Cutting with cutting equipment that is blunt or faulty (wrong type or badly sharpened) will increase the vibration level.

!

WARNING! Overexposure to vibration

can lead to circulatory damage or nerve

 

damage in people who have impaired

 

circulation. Contact your doctor if you

 

experience symptoms of overexposure

 

to vibration. Such symptoms include

 

numbness, loss of feeling, tingling,

 

pricking, pain, loss of strength, changes

 

in skin colour or condition. These

 

symptoms normally appear in the

 

fingers, hands or wrists. These

 

symptoms may be increased in cold

 

temperatures.

Battery and battery charger

This section describes the battery and battery charger safety for your battery product.

Only use Husqvarna original batteries for Husqvarna products and only charge them in an original battery charger from Husqvarna. The batteries are software encrypted.

Battery safety

The rechargeable Husqvarna batteries, BLi, are exclusively used as a power supply for the relevant Husqvarna cordless appliances. To avoid injury, the battery must not be used as a power source for other devices.

!

WARNING! Protect the battery from

direct sunlight, heat or open flame. There

 

 

is a risk the battery may explode if it is

 

thrown into an open fire.There is a risk of

 

burns and/or chemical burns.

English 13

Page 13
Image 13
Husqvarna 536 LIXP, 436 LI manual Battery and battery charger