Stopping

STARTING AND STOPPING

The machine is deactivated by pressing the start/stopp button on the keypad (green LED off).

Note! To avoid involuntary start up, the battery must always be removed when the machine is not in use or is unsupervised. To remove the battery, withdraw it from the machine while pressing the battery release buttons on the battery.

26 – English

Page 26

Image 26

Husqvarna 436 LI, 536 LIXP manual Stopping

Contents

436 Li, 536 LiXP Symbols on the battery and/or on the battery charger KEY to SymbolsSymbols on the machine Symbols in the operator’s manual Contents Introduction Dear Customer What is WHAT? What is what on the chain saw? General Safety Precautions General power tool safety warnings Chain saw safety warnings Battery tool use and careService Causes and operator prevention of kickback Before using a new chain saw Always use common sense Personal protective equipment Keypad Machine′s safety equipmentAutomatic switch off functionality Chain brake and front hand guard General Safety Precautions Battery and battery charger General rules Battery charger safetyCutting equipment Cutting equipment designed to reduce kickback Sharpening your chain and adjusting depth gauge setting General information on sharpening cutting teeth Tensioning the chain General advice on adjusting depth gauge settingAdjustment of depth gauge setting Too large Lubricating cutting equipment LiXP436 Li Chain drive sprocket Filling with chain oilChecking chain lubrication Checking wear on cutting equipment Working with the chain AssemblyFitting the bar and chain Fitting a spike bumper Battery charger Battery HandlingBattery LED display Charging status Disposal of the battery, battery charger and machineTransport and storage Starting Starting and StoppingStarting and stopping Starting Stopping Before use Basic safety rulesWorking Techniques SavE General rules Handles with both hands Basic cutting techniqueNot safely controlled with one hand General Safe distance Tree felling techniqueLog is supported at both ends. There is a high risk Felling direction Your saw Clearing the trunk and preparing your retreatFelling Training we advise you not to fell trees Directional cuts Freeing a tree that has fallen badly Freeing a trapped tree How to avoid kickback What is kickback? Cutting the trunk into logs Checking the front hand guard MaintenanceGeneral Checking the inertia brake release Lubricating the bar tip sprocket Battery connectorsPower trigger lockout Cooling system Maintenance schedule Daily maintenance Weekly maintenance Monthly maintenance Battery charger Troubleshooting scheduleBattery Keypad Possible faults Possible action Technical Data Technical data Applies to Europe only Guide bar and saw chain combinationsSaw chain ﬁling and ﬁle gauges EC-declaration of conformity Page Page 1154476-26