Instructions for the installer

4. FINAL OPERATIONS

After replacing the nozzles, reposition the flame-spreader crowns, the

burner caps and the grids.

4.1 Adjustment of the hob burner minimum level for natural gas

Light the burner and turn it to the minimum position . Extract the gas tap knob and turn the adjustment screw at the side of the tap rod until the correct minimum flame is achieved. Refit the knob and verify that the burner flame is stable (turning the knob rapidly from the maximum to the minimum position the flame must not go out). Repeat the operation on all the gas taps.

4.2 Adjustment of the hob burner minimum level for LPG (propane)

To regulate the minimum for LPG (propane), completely tighten

(clockwise) the screw inside or next to the gas tap pin (depending on the model).

4.3 Arrangement of the burners on the hob

Burners

1Auxiliary

2

Semi rapid

4Wok

13

Page 11
Image 11
Smeg FS61MFXLP, FS60WHNG, FS60XNG Final Operations, Adjustment of the hob burner minimum level for natural gas, Burners