Accusys eXpeRAID manual CLIDeleteArray 1 Enter, CLISetSlice Array=1 Slice=0 Size=120 Enter

				ACCUSYS, INC.
			5F, 38 TAIYUAN ST, JHUBEI, HSINCHU, TAIWAN, R.O.C.
TITLE	EXPERAID COMMAND LINE INTERFACE USER GUIDE
PROJECT		“DESKTOP RAID”		DOCUMENT STATUS	OFFICIAL RELEASE
REV.	G–05-NOV-2007				PAGE 17 OF 27

3.3.3.2

Command Name	Command Description
DeleteArray	Use this command to delete a specified array.
Parameter 1	Parameter Description
Array No.:	Array No.:
<1~4>	Specify an array number to be deleted.
	Example
	CLI>DeleteArray 1 [Enter]
	Array 1 will be deleted if it exists and is not in use.
3.3.3.3
Command Name	Command Description
CreateJBOD	Use this command to create JBOD with the specified drive number.
Parameter 1	Parameter Description
Drive No.:	Drive No.:
<1~n>	<1~n>, where n stands for maximum available drive number.
3.3.3.4
Command Name	Command Description
DeleteJBOD	Use this command to delete an existing JBOD.
Parameter 1	Parameter Description
JBOD No.:	JBOD No.:
<1~n>	<1~n>, where n stands for maximum JBOD number.
3.3.3.5
Command Name	Command Description
SetSlice	Use this command to set a slice for the specified array.
Parameter 1	Parameter Description
Array No.:	Array No.:
<Array=<1~4>>	Specify an array number to set slice.
Parameter 2	Slice Number:
Slice Number:
<Slice=<0~15>>	Specify the slice number to be created.
Parameter 3	Slice size:
Slice size:
<Size=xxx>>	Measures in GBytes. Set “Size=0” to delete a slice.
	Example
	CLI>SetSlice Array=1 Slice=0 Size=120 [Enter]
	Slice 0 will be set to 120GB if Array 1 exists and the free capacity of
	Array 1 is large enough(>120GB).