Yard-Man 5020.1, S030~1, 5010-1 manual URJCAT ~NPOINtS, lV..JCATION, CHAMGINGtN&IN, Tightness

CH'AMGINGtN&IN} 0:1('

Drain oil when engine is warm. ~emove oil drain plug and allow oi! to drain completely. Replat;e drQin plug and tighten securely.

s~ engine ~anual fpt. cQmplete englr'!e.ubric8tion and

~rVjce instructions" ;.

(U'RJCAT:~N'POINtS

,l,.UBRICATE THE PARTS,PERIODICALLY

AS,:llL~STRATED

The following points are to be lubricated every five hour~ of operation with SAE 20 weight light duty oil, uniess otherwise noted,

1, Clutch flipper,

2, Reverse arm.

3.Depth bar linkage.

4.Wheel$

5.Masterclutch control.

*6. Ge;arhousit19.

.Before operating the tiller. check the oil level in the gear case by removing the ojl level plug. With the tiller on a level surface or sTightly til~fJ.dback, the oil level should be (it least to this o.penit;gor above. Every 10.15 hours check and maintain this oil level using. a heavy duty gear oil, such as GX-90 dr Type 47 04tboard Motor Oil (90 weight~. Drain the gear caseand refill every 25 hours, To drain the oi1 from th~ gear case, first dr~in the oil and gas from the engine. Then remove the drait1Plugand tilt the unit forward.

NOTE: The gear case $hould not i:!efilled completely full.

AFTER BREAK,;IN PERIOD. {FIRST 3 TO 4 HOURS OF

OPERATION} CHECK ALL BOLTS AND NUTS FDA

TIGHTNESS.

'7

.lV..JCATION