Before Operation - Sound Mode Descriptions (Continued)
Sound Mode
ote
You can enjoy surround sound simply by selecting one of the
Each time you press SOUND EFFECT button, the sound mode is changed in the following order;
PROLOGIC → HALL 1 → HALL 2 → THEATER
ote
For the DVD, you can select only when PCM indicator is shown in the display window.
Each time you press |
|
| button, the sound mode of |
Pro Logic II is changed in the following order;
PROLOGIC → MOVIE → MUSIC → VIRTUAL → MATRIX
When you play sound tracks with 96kHz sampling frequency, the output signals will be converted to 48kHz (sampling fre- quency).
Sound Level
You can set the sound level of the desired channel.
Press LEVEL.
1 The level indicator will appear in the display window.
Use b/B to select a desired speaker to set.
2 Each time you press the b/B button, it is changed as the following order;
FL (Front Left) ↔ C (Center) ↔ FR (Front Right) ↔ SR (Surround Right) ↔ SL (Surround Left) ↔
SW (Subwoofer) ↔ FL (Front Left)
• On the 2 channel stereo mode, you can only select the SW (Subwoofer).
PREPARATION
ip
You can select SURROUND OFF (2CH STEREO) mode by pressing BY PASS button.
When DVD is inserted.
You can change the sound mode of DVD (Dolby Digital, DTS, PRO LOGIC, etc) by pressing the AUDIO button on the remote during playback.
Although the DVD contents differ from disc to disc, the follow- ing explains the basic operation when this feature is used.
Each time you press AUDIO button, the sound mode of DVD is changed in the following order;
→ 
→ 
and 
When DVD is inserted and PROLOGIC II indicator lights.
Each time you press |
|
| button, the sound mode of |
Pro Logic II is changed in the following order;
PROLOGIC → MOVIE → MUSIC → VIRTUAL → MATRIX
ip
You can set PRO LOGIC II mode to Off (2CH STEREO) by pressing BY PASS button and the PROLOGIC II indicator dis- appears.
3 Use v/V to adjust the sound level of the select- ed channel.
4 Repeat step
5If setting is complete, press LEVEL.
Test Tone
This function allows you can easily adjust the sound balance of the speakers from the listener’s position.
1SelectTONE. the test tone mode by pressing TEST
•A hiss noise comes out for 2 seconds from each speak- ers in the following order;
FL (Front Left) → C (Center) → FR (Front Right) → SR (Surround Right) → SL (Surround Left) →
SW (Subwoofer) → FL (Front Left)
You can adjust the sound level during operating
2 the test tone, first press LEVEL then press v/V buttons, so that all speaker’s sound level is same from the listener’s position.
•During operating the test tone, if you adjust the sound level, it will be paused in the current speaker channel.
3If setting is complete, press TEST TONE.
For your reference
•The DVD+VCR memorizes the last mode settings for each source individually.
•You can identify the encoding format of program software by looking at its packaging.
-Dolby Digital discs are labeled with the 
logo.
-Dolby Surround encoded programs are labeled with
the 
logo.
-DTS Digital Surround discs are marked with DTS.
17
