Connections (Continued)
Radio Antenna Connections
Connect the supplied FM/AM antennas for radio listen- ing.
1 Connect the AM loop antenna to the AM antenna connectors.
2 Connect the FM wire antenna to the FM antenna connectors.
otes
To prevent noise pickup, keep the AM loop antenna away from the DVD+VCR and other components. Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it as hori- zontal as possible.
AM loop antenna (supplied)
FM wire antenna (supplied)
Rear of DVD+VCR
Accessory Audio/Video (A/V) Connections to DVD+VCR
Connect the VCR IN LINE1 or LINE2 jacks on the DVD+VCR to the audio/video out jacks on your accessory component, using optional audio/video cables.
Jack panel of Accessory Component (VCR, Camcorder, etc.)
AUDIO
OUTPUT
R
L
VIDEO
OUTPUT
Digital Device Connections
Connect the DIGITAL AUDIO IN (OPTICAL) jacks on the DVD+VCR to the digital audio out (optical) jacks on your digital device (DVD Player, Game device, etc.), using optional optical audio cable.
To select source of DVD+VCR to OPTICAL IN, press AUX on the remote control.
otes
If the audio format of the digital output does not match the capabilities of your DVD+VCR, the DVD+VCR will produce a strong, distorted sound or no sound at all.
The Optical input function is available only when the other unit’s Sampling Frequency is 32 - 48kHz.
Game Device |
| HDTV Receiver | |
|
|
|
|
|
|
|
|
OR
Rear of DVD+VCR
OR
Rear of DVD+VCR | Front of DVD+VCR |
14
