Zenith XBS245 warranty Before Operation VCR Mode Using the VCR Setup Menu, Channel Selection

Before Operation - VCR Mode (Continued)

Using the VCR Setup Menu

1Press MENU and the MAIN menu will appear.

Use v/V to select the VCR SETUP menu, then

2 press SELECT/ENTER.

The VCR SETUP menu will appear.

SET CLOCK
TIMER RECORD		SCREEN DISPLAY:	ON
		LANGUAGE:
CHANNEL SETUP		AUDIO MODE:
		BROADCAST TYPE:
VCR SETUP		AUDIO OUTPUT:
SELECT	ENTER	SELECT	ADJUST
TO EXIT PRESS		TO EXIT PRESS

3 Use v/V to choose a desired option on the VCR SETUP menu. Then use b/B to choose a desired setting.

SCREEN DISPLAY

The on-screen display of this DVD+VCR can be turned on or off. SCREEN DISPLAY can be switched between ON and OFF by using b/B.

LANGUAGE

The on-screen programming of this DVD+VCR can be displayed in English, Spanish, or French.

LANGUAGE can be switched among ENGLISH, SPANISH and FRENCH by using b/B.

AUDIO MODE

The DVD+VCR has two separate audio playback systems, the high-quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a DVD+VCR that does not have VHS Hi-Fi.

AUDIO MODE can be switched between HI-FI and NORMAL by using b/B.

BROADCAST TYPE (STEREO/SAP/MONO)

Multichannel Television Sound (MTS) carries stereo and/or Second Audio Program (SAP) bilingual signals. Set this display to the desired position when both MTS stereo and SAP signals are received. When only one of the MTS signal is received, the DVD+VCR automatically selects the corresponding receiving mode (Stereo or SAP) regardless of the selected position. For normal operation, the display should be in the STEREO position. The DVD+VCR will then record a STEREO program when available, and record a mono program If the program is NOT IN STEREO.

For weak STEREO and/or SAP broadcasts, changing the dis- play to mono may give clearer sound.

BROADCAST TYPE can be switched among STEREO, SAP, and MONO by using b/B.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch), and RF.OUT.

This display setting should normally be left in the stereo posi- tion, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

AUDIO OUTPUT can be switched among STEREO, LEFT, and RIGHT by using b/B.

Channel Selection

This DVD+VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69 and CATV channels 1-125.

Preparation:

Connect the DVD+VCR to the desired type of antenna or cable TV system, as shown in Connecting Antenna/Cable TV to DVD+VCR on page 11.

AUTO CHANNEL PROGRAMMING

1Press MENU and the MAIN menu will appear.

2 Use v/V to select the CHANNEL SETUP menu, then press SELECT/ENTER.

The CHANNEL SETUP menu will appear.

SET CLOCK
TIMER RECORD		AUTO CHANNEL SEARCH
		CHANNEL SOURCE:
CHANNEL SETUP		ADD/DEL CH:
		INPUT SLECT:
VCR SETUP
SELECT	ENTER
TO EXIT PRESS

3then use b/B to select TUNER.

Press b/B repeatedly to switch among TUNER, LINE1 and LINE2.Use V to choose the INPUT SELECT option,

Use v/V to choose the AUTO CHANNEL SEARCH

4 option, then use b/B to find channels.

The tuner will automatically cycle through all available channels in the area and place them in the tuner’s memory.

5ING is complete, make sure the CHANNEL SOURCE is set appropriately (TV or CATV) by pressing v/V and choosing the correct CHAN- NEL SOURCE (TV or CATV) by using b/B using the CHANNEL SETUP menu.

Remember, TV is for the air antenna reception, CATV is for cable or wireless cable connection.After the AUTO CHANNEL SEARCH PROCEED-

6Press MENU to return to the TV screen.

7front panel to cycle the DVD+VCR through the channels in memory.Use CH/TRK (v/V) or CH/PRESET (v/V) on the

TO ADD OR ERASE CHANNELS FROM MEMORY

This feature allows you to add or erase channels from memory manually.

1Press V to choose the ADD/DEL CH option on the CHANNEL SETUP menu. Use b/B to select a chan- nel to add or erase.

2Press SELECT/ENTER to add or erase the channel. Repeat steps 1 and 2 to add or erase channels.

3Press MENU to return to the TV screen.

20