Topcon A2677 manual Setup Spray ECU Only, Enable Pump Control Button

X20 Sprayer Reference Manual

Setup (Spray ECU Only)

Figure 8-18. Options>Setup Page>

ECU Configuration

Enable Pump Control Button

The Enable Pump Control Button option is displayed when Spray ECU is selected as the controller (page 8-7) and when Prop. Valve (Proportional Valve) (page 8-14) and Pr. Sense (Pressure Sensor) (page 8-15) are selected.

When the Enable Pump Control Button option is selected an extra button to the left of the Master Switch on the Working screen, called PUMP will be displayed.

When the PUMP button is switched OFF, on the Working screen the proportional valve closes (by setting the PWM to zero) and stops the oil flow to the pump.

See page 16-1 for more information.

A2677 Rev 1.5 8-53