Topcon A2677 manual Installing the Sprayer Harness, Sprayer Harness Connectors

X20 Sprayer Reference Manual

Installing the Sprayer Harness

Figure 5-5 on page 5-10 shows the Sprayer Harness and Valve Harness Assembly.

1.Connect the connector on the Sprayer Harness to the Tractor Harness, at the back of the tractor or vehicle

2.Continue to run the Sprayer Harness across the Sprayer’s chassis, to the valve set

WARNING WARNING

Do not cut or splice the Sprayer Harness; all excess cable should be strapped away to avoid vibration and wear.

Sprayer Harness Connectors

The typical Sprayer Harness has 5 connectors (Figure 5-5 on page 5-10), which are labelled:

•Ground Speed—connects to the Shaft/Speed Sensor Kit (supplied in kit)

•Flow Meter 1—connects to a Flow Meter (not supplied in kit)

•Pressure Sensor 1—connects to the Pressure Sensor (supplied in kit)

•Reg Valve 1—connects to a Regulator Valve (not supplied in kit)

•Valve Harness—connects to the Valve Harness (supplied in kit).

5-8 www.topconpa.com