X20 Sprayer Reference Manual

Electronic Control Unit (ECU)

Figure 8-2. Options>ECU Page

COM Port

Select which Communications Port (COM Port) the 9 pin serial cable from the Spray Rate Controller ECU is connected on the back of the X console.

Usually COM2 is selected.

COM 1 is usually reserved for the Guidance GPS or DGPS receiver.

NOTICE NOTICE

If the COM Port is changed or selected you must restart the software.

8-6

www.topconpa.com

Page 86
Image 86
Topcon A2677 manual Electronic Control Unit ECU, COM Port