Topcon A2677 manual 11-9

Models: A2677

1 268
Download 268 pages 19.43 Kb
Page 187
Image 187

X20 Sprayer Reference Manual

For ASC to work the Auto Section Enabled option has to be enabled (page 8-1) in the Sprayer software. When Auto Section Enabled has been selected then the ASC Master button will appear on the Topcon Logo Bar, on the Guidance Working screen. The ASC Master button will not function unless ASC has also been enabled in the Guidance software General Setup (see Guidance Manual).

When the ASC Master button is green then the ASC control will control sections ON or OFF as required. When the ASC Master button is red then the ASC control will be disabled and the switching OFF and ON of sections will be performed by the operator. Therefore the ASC can be left enabled in the Guidance, and enabled or disabled from the Guidance Working screen by selecting the ASC Master button.

Please note: The sections switch OFF when the Boom Section is fully over an already mapped (applied) area. The sections also switch ON so that there is no untreated areas left.

A2677 Rev 1.5

11-9

Page 187
Image 187
Topcon A2677 manual 11-9