X20 Sprayer Reference Manual
Connecting the Spray ECU to the Battery
WARNING WARNING
Do not attach the wires to the battery terminals until the installation of the Tractor Harness, Sprayer Harness and Valve Harness is completed.
WARNING WARNING
If your tractor uses 24 Volt batteries, you must use a 12 Volt/15 Amp (minimum) inverter.
1.Connect the Power/Comms Harness directly to 12 VDC battery terminals (Figure
Figure 5-12. Battery Configuration
CAUTION CAUTION
Do not connect the Power/Comms Harness to an alternator or starter motor as this may cause interference or power fluctuations or surges and may damage your system.
A2677 Rev 1.5 |
