X20 Sprayer Reference Manual
Select Off if you want to be able to switch the Treatment button ON and OFF (on the VRC [Maplink] screen), independently of the Sprayer Master Switch.
Select Master Switch Only for the logging in the VRC to follow the Master Switch.
Master ON means that logging is ON and Master OFF means that logging is OFF.
Master Switch and Flow is usually selected when ASC is enabled, see “Automatic Section Control (ASC)”, page
If all the sections are switched OFF under ASC, but the Master is still ON the logging will stop because there is no flow present. Therefore logging will stop if all the sections are switched OFF, the Master is switched OFF or the actual spray rate is ‘0’.
NOTICE NOTICE
When using Spray Rate Controller Version 1.98 or later with X20 Guidance the On Time and Off Time options are inaccessible in the X20 Guidance and the values have to be entered in the Spray Rate Controller Options>GPS page.
On Time
On Time is the time the Sprayer looks ahead (in seconds) to switch ON the section valves.
Change the ON Time by pressing the calculator icon and entering the desired value, see Appendix A for more detail.
A2677 Rev 1.5 |
