X20 Sprayer Reference Manual
MANUAL button is still red and the application rate will be displayed but showing a white background; these both indicate the Sprayer is spraying in manual mode. This will happen if a Low Speed Shutoff value has not been reached.
Once the speed increases and the speed goes above the Low Speed Shutoff value then the AUTO button will become highlighted and the green indicator will be shown on the AUTO button, the application rate will have an orange background when the rate has been achieved.
The Sprayer is now spraying in Auto mode.
While Spraying
While spraying:
•Speed will be displayed
•Area and Volume will start accumulating
•Pressure will be displayed (if selected)
•Either Volume/Minute or Volume/ Nozzle will be displayed
•The Volume remaining on the Tank icon will start counting down
•The current application rate will be displayed
•Any alarms that arise will be displayed
•Once the tank icon turns to red, the Low Volume point has been reached, alerting the operator the tank has reached the low point’ alarm
•When the Master Switch is OFF it turns red, when the Master Switch is ON it turns green.
A2677 Rev 1.5 |
