X20 Sprayer Reference Manual
Speed | | Speed |
| | | | | |
| | | | | | Window |
Valve | | | | |
| | |
Number | | | | | |
| | |
Low | | | | Speed |
| | |
| |
| | | | |
Speed | | |
Shutoff | | | Readout |
|
Value | | | |
| | | | | | |
Figure 10-3. Working Screen Showing
Speed Window
The Speed Readout (Figure 10-3) displays the current ground speed, either from: Wheel sensor, Tractor Radar, GPS Speed (page 8-8) or Test Speed.
Select the Speed Readout to display the Speed window (Figure 10-3).
•Test Speed—A test speed can be entered to perform all tests necessary while the Sprayer is stationary. The Spraying software will simulate a speed whilst stationary, the Sprayer will operate in Manual or Auto modes, enabling the checking of pumps, Flow Meter, nozzles, regulator etc
Select the Increase Speed arrow (►) or Decrease Speed arrow (◄) (Figure 10-3) to set a test speed. The test speed will be displayed in the Speed Readout
•Wheel Factor—The current Wheel Factor is displayed. When the calculator icon, next to the Wheel Factor is selected, the Wheel Factor Entry window is displayed. This is the same window as
