Topcon A2677 manual Connecting, Setup

X20 Sprayer Reference Manual

•Sprayer Harnesses—Hardi 5500 Spray Interface

Please note: Hardi 5500 Spray ECU Rev 1.0 (you can find the Rev No. next to the Part No. on the label) had no logo or labels next to the plugs. Rev 1.0 also had tails on the Power/Comms and Foam/End plugs.

Connecting

1.Connect the 39 pin plug Sprayer Harness from the Hardi 5500 controller to the Sprayer Harness on the Hardi 5500 Spray ECU

2.Connect the Power/Comms harness to the Power/Comms connection on the Spray ECU

3.Connect the 9 pin serial plug to the back of the X console

4.Connect the battery leads to the tractor battery

5.Connect the Foam/End to the Hardi's Foam/Fence End harness

6.Connect the external Switchbox to the plug marked 'Switchbox' on the HARDI 5500 Spray ECU

Setup

1.Select Spray ECU on the Options>ECU page, in the Controller window (page 8-7)

2.Select ECU ECU, ECU 3 on the Options>ECU page, in the ECU Model window (page 8-11)

16-2 www.topconpa.com