Topcon A2677 manual Spray ECU, Ecu

X20 Sprayer Reference Manual

Spray ECU

If Spray ECU was selected as the controller (page 8-7):

•Select Wheel Sensor if a ground speed sensor is connected to the spray harness plug marked Connector 1 on the Spray

ECU

The wheel sensor is usually located on the boom spray.

•The Raven Spray ECU 3 and Spray ECU/SR has a 3-pin weatherpack plug marked Radar on the Spray ECU 3, if a Radar is connect to this plug select Tractor Radar

•Select GPS if the speed is coming from a DGPS receiver.

NOTICE NOTICE

Guidance and Spray Rate Control must be selected from the Product Selection screen before GPS is selected.

A2677 Rev 1.5 8-9