X20 Sprayer Reference Manual
No Ground | This alarm is triggered if the master switch is turned |
Speed | on in Auto and there is no ground speed present. If |
| there is a large circumference figure in the Sprayer, |
| the time between pulses when travelling slowly may |
| be interpreted as not travelling. The Sprayer would |
| only work at this speed in manual and have no appli- |
| cation rate showing. |
No Comms | This indicates that the ECU is not communicating to |
| the X20 console. Refer to the "NO COMMS" trouble- |
| shooting above. |
High Pump | The Pump speed is an option and is usually required |
Speed | where a piston or diaphragm pump is being driven |
| from a hydraulic motor. These pumps will be dam- |
| aged is driven over their maximum speed. |
Low Pump | A low pump speed will usually reduce the efficiency |
Speed | of the pump and cause other Sprayer problems. |
| www.topconpa.com |
