X20 Sprayer Reference Manual
If using more than one tank, make sure Tank is ON is switched ON for each tank. The Tank icon will be an orange color if the tanks are ON and a volume is entered into the console.
Spraying in Manual Mode
7.Select the MANUAL button
The button will be highlighted and the green indicator, on the MANUAL button will be displayed.
8.Press the increase and decrease arrows (▲▼) to set the pressure
9.Switch the Master Switch ON and drive to the set speed and pressure for the nozzle selection, using the increase and decrease arrows (▲▼) to set the pressure.
Spraying in Auto Mode
7.Select the AUTO button
The MANUAL button will still be highlighted but the indicator light on the MANUAL button will be red; indicating the Sprayer has the Auto mode selected but is not spraying in Auto mode yet.
8.Select the Master Switch
If a Low Speed Shutoff is selected then the Boom Sections will be red and are not spraying.
Once the Sprayer takes off, the Speed Readout will display the current speed. When the speed goes above the Low Speed Shutoff value the Boom Sections turn green and start spraying in manual mode. The indicator on the
www.topconpa.com |
