X20 Sprayer Reference Manual
Custom Section Mapping
Figure 8-10. Custom Section Mapping
As the current Sprayer Switchbox has only 6 switches available, and the Spray ECU can control up to 30 sections. Custom Section Mapping provides a method of operating several sections from each switch.
Specific requirements will vary between operators and this window allows the operator to set which section switches operate which section valves.
The example (Figure
3 are operated by Switch 1, sections 4,5 and 6 are operated by Switch 2 etc, with the second line being controlled from switch 6 through the control circuit for section 1.
By touching the screen put an ‘X’ in the box (touching the same box again will remove the ‘X’ from the box).
A2677 Rev 1.5 |
