X20 Sprayer Reference Manual
9.Compare this volume with the value shown in the Flow readout, volume/nozzle/minute directly under the Manual button, this is the "Calculated" amount
10.Write the "Calculated" value down
11.Select the Tank icon
The Tank Setup window will be displayed (Figure
12.Write down the current Cal. Factor for the Flow Meter as displayed
13.Using the formula below, calculate the new Cal. Factor:
Current Cal. Factor X "Calulated" Amount = New Cal. Factor "Actual" Amount
14.Enter the New Cal. Factor using the Manual Entry method (page
Please note: Jug tests are not as accurate as the total volume measurement as some errors will exist due to misting, over spray, nozzle tolerances and variations in flow rates through boom hoses.
| www.topconpa.com |
