X20 Sprayer Reference Manual
5.Check the number of Guidance sections used, in the Guidance window, and change if necessary, see page
6.Enter the swath width of the Spray Boom, on the Sections page, by entering in the Section widths of each of the Boom Sections, see page
7.Enter the number of nozzles on each Boom Section, on the Sections page, see page
8.Enter the Minimum Flow value of the nozzles fitted to the Spray Line, on the Sections page, check nozzle chart, see page
9.Enter the Flow Calibration factor for the Flow Meter, on the Sensors page, see page
10.Enter the Flow Meter's Minimum Flow value, check the Flow Meter’s specifications, on the Sensors page, see page
11.Enter the Wheel Calibration, on the Setup page, see page
12.You may change the Units, on the Units page, to suit your preferences, see page
13.Save changes to the User Configuration, see Chapter 9
A2677 Rev 1.5 |
