Topcon A2677 manual Installing the Tractor Harness, Tractor Harness Extras Two 37-Pin Connectors

X20 Sprayer Reference Manual

Installing the Tractor Harness

Figure 5-3 on page 5-7 shows the in cab assembly showing Spray ECU, Switchbox, Power Comms and Tractor Harness.

1.Connect the Tractor Harness to the 37-Pin connector marked CONNECTOR 1 on the Spray ECU

2.Run the Tractor Harness from the Spray ECU to the drawBar or the back of the vehicle.

NOTICE NOTICE

Ensure that the Tractor Harness is tied away from moving, hot and sharp objects.

WARNING WARNING

Do not cut or splice the Tractor Harness, all excess cable should be strapped away to avoid vibration and wear.

Tractor Harness Extras

Two 37-Pin Connectors

If your Tractor Harness has two 37-Pin connectors you would have (in step 1) connected the male pin, marked CONNECTOR 1 to the plug marked CONNECTOR 1 on the Spray ECU.

You will also have to plug the other 37-Pin connector (female pins), marked CONNECTOR 2 to the plug marked CONNECTOR 2 on the Spray ECU.

A2677 Rev 1.5 5-5