Topcon A2677 manual 10-11

X20 Sprayer Reference Manual

•Sub Area Number—displays the selected Sub Area Number. The Sub Area Number is displayed in the Area window and in the Sub Area and Sub Volume Readouts

The Sub Area Number is selected by using the Sub Area Number Selector arrows (◄►) (Figure 10-4 on page 10-10). By using the arrows you can select from 10 Sub Areas (0-9). As the Sub Area Number changes the Sub Area and Sub Volume values will change to display the areas and volumes accumulated for the selected Sub Area Number.

Select the calculator icon aligned next to Area or Volume to enter a preset value.

Selecting the Reset button next to the Area or Volume allows the area and volume (weight) to be reset individually for the Sub Area Number selected.

Please note: The Sub Volume units reflect which Tank Mode was selected for each tank Liquid, NH3, Granular or Injection (page 8-14) and also the units that are selected (page 8-55).

If only one tank is selected then the Sub Area/Volume readouts are for Tank 1. If more than one tank is selected, then the operator can elect to display the Sub Area/Volume readouts for each tank. When more than one tank is selected arrows (◄►) appear next to the Tank Number, the arrows are used to select a tank number. The Sub Area/Volume readouts will display the area covered and volume used for each tank, on both the Working screen and Area window readouts. As the arrows are used to select the Tank number you will notice the Tank Indicator on the Working screen will change to show which Tank the Sub Area/ Volume readouts are displaying.

A2677 Rev 1.5 10-11