Topcon A2677 manual Off

X20 Sprayer Reference Manual

Choosing the Correct Adaptor for the Dump Valve

Part No. Usage

	Use if connecting to a 2-wire dump valve and 12V
A2266	is applied to the dump valve when the Master switch
	is OFF
	Use if connecting to a Solenoid Valve, with 6mm
A2267	spade terminals and 12V is applied to the dump
	valve when the Master switch is OFF
A2268	Use if connecting to a 3-Wire Dump Valve and 12V
	is applied to the Dump Valve when the Master is
	OFF
	Use when connecting to a 3-Wire Dump Valve and
A2269	12V is applied to the Dump Valve when the Master
	is ON

Figure 5-1. How to Choose the Correct Adaptor for the

Dump Valve

2.When all the Arag connectors are in place, tighten the screw at the top of the Arag connector, using a screwdriver, to secure the connector to the Section and Dump Valves

3.Tidy any excess harness, using cable ties

To complete the installation go to page 5-31, to connect the Spray ECU Power/Comms Harness to the battery.

5-24 www.topconpa.com