X20 Sprayer Reference Manual
Installing the Spray ECU (all models)
This chapter is for first time operators of the Sprayer software. If you are an operator who is installing upgrades to your existing software (Spray Rate Interface or Spray ECU is already installed) please ensure you have read Chapter 4, and then continue to Chapter 7.
WARNING WARNING
Damage will occur if any external power is applied to the Section Drive Outputs on the Sprayer ECU.
TIP
TIP
Follow the following procedures carefully, to ensure that no damage is done.
WARNING WARNING
Disconnect both the X20 console and Spray ECU controller, from the battery, before charging, jump starting or welding on the vehicle and/or Sprayer.
A2677 Rev 1.5 |
