X20 Sprayer Reference Manual
NOTICE NOTICE
Care should be taken when running the Tractor Harness from the Spray ECU.
2.Lead the Harness from the Spray ECU to the back of the vehicle
TIP TIP
Tie cable back, where possible.
WARNING WARNING
Do not cut or splice the Sprayer Harness, all excess cable should be strapped away to avoid vibration and wear.
3.Securely mount the Breakaway connector above any hydraulic outlets, to reduce the risk of oil ingress to the connectors
WARNING WARNING
Do not expose the connectors to high pressure water or oil.
4.Connect the Tractor Adaptor Harness to the existing Sprayer Harness.
Refer to the console manual for installing the console to the vehicle.
To complete the installation go to page
A2677 Rev 1.5 |