Topcon A2677 manual Sensors Spray ECU Only, OptionsSensors ECU Configuration

X20 Sprayer Reference Manual

Sensors (Spray ECU Only)

Figure 8-13. Options>Sensors Page>

ECU Configuration

Pressure

When Spray ECU is selected as the controller (page 8-7) there are 2 extra types of Pressure sensors available: Current and Voltage.

If 5 Bar or 10 Bar are selected in the Type window then the Calibration Method window and the Sensor Specifications button in the Pressure window are not displayed.

Select the type of Pressure sensor connected to the Sprayer. Check the Pressure Sensor manufacturers details to select the correct type of Pressure Sensor.

If Current or Voltage is selected then the Calibration Method window is displayed (Figure 8-14 on page 8-43).

8-42 www.topconpa.com