Topcon A2677 manual Pin Weather Pack Sensor

X20 Sprayer Reference Manual

Please note: The Sprayer Harness may have other connectors, refer to the Sprayer Installation kit that came with your Sprayer kit for more information.

The Dump Valve connector may be located on the Sprayer Harness. If the Valve Harness has an Arag Interface box incorporated into the Valve Harness, then the Dump Valve connector will be located on the Valve Harness.

TIP

Figure 5-4. 3-Pin Weather Pack Sensor

TIP

For testing purposes on all 3-Pin sensor connectors (Shaft/Speed Sensor and Flow Meter) the voltage on each pin should be:

•Pin A: +% VDC Signal

•Pin B: Ground

•Pin C: +12VDC Sensor Power

See Figure 5-4.

A2677 Rev 1.5 5-9