Topcon A2677 manual Color indicators

X20 Sprayer Reference Manual

•Boom Sections—displays the number of Boom Sections selected.

If Dual line is selected (see "Lines", page 8-25) dual boom is shown, showing the front and back lines; the top line representing the front line and the bottom line representing the back line.

If Single line is selected (see "Lines", page 8-25) then only a single line of sections will be displayed.

The Boom Sections are numbered starting from the left side of the spray line, with the far left Section Valve being section valve ‘1’.

The Boom Sections can be switched ON/OFF, either by touching the Boom Section on the Sprayer Working screen (Figure 6-7) on page 6-6) or by switching the Boom Sections switches ON/ OFF on the External Switchbox.

Table 6-1 shows what different color Boom Sections and Spraying Indicators indicate about their status.

Boom Sections and Spraying Indicators Color Indicators

Boom Spraying Meaning

Section Indicator

Boom Sections are switched OFF.

Boom Sections are switched ON but the Low Speed Shutoff speed has not been reached or Master is OFF

Boom Sections are switched ON, the Low Speed Shutoff speed has been reached, ready to start spraying.

	Boom Section is ready for spraying	but
	Master Switch is OFF.
	Master Switch is ON and Boom Section
	valve is spraying.
	Table 6-1. Color indicators
A2677 Rev 1.5			6-7