Topcon A2677 manual Installing the Shaft/Speed Sensor Kit to a Tailshaft

X20 Sprayer Reference Manual

Installing the Shaft/Speed Sensor Kit to a Tailshaft

On a tray mounted Sprayer the Shaft/Speed Sensor kit can be used to read from the vehicle Tailshaft (Figure 5-8).

1.Securely mount the Magnet Block on the flange, between the Transmission Housing and Tailshaft, using the Hoseclamp or other suitable means (Figure 5-8)

NOTICE NOTICE

Do not attach the Magnet Block (Figure 5-8) directly to the Tailshaft as its position changes, throughout its rotation.

Please note: The wheel stud magnets are not used in this case.

Figure 5-8. Shaft/Speed Sensor installation to a Tailshaft

2.Securely mount the Shaft/Speed Sensor so it squarely faces the Magnet Block with a clearance of 2 to 3mm (1/16 to 1/8 inch), using an existing bolt on the transmission housing and the supplied Mounting Brackets or other suitable means.

A2677 Rev 1.5 5-15