Topcon A2677 manual Pressure Pr Sense

X20 Sprayer Reference Manual

Pressure (Pr) Sense

The Spray Rate Controller can monitor the pressure in a spray system, which is displayed as a Pressure readout on the Working screen (Figure 6-7 on page 6-7). The Spray Rate Controller uses Flow to control.

Low and high pressure alarms can be set, to alert the operator when the pressure in the system goes above the high alarm point or below the low alarm point, see “Alarms”, 8-57.

Select Tank 1 if an electronic Pressure Sensor is fitted to the Sprayer, otherwise leave deselected. See page 8-38 or 8-42 (for Spray ECU configuration) to select the type of electronic Pressure Sensor fitted to the system.

If more than 1 tank was selected in the Tanks window then a Pressure Sensor can be selected for each tank that has a Pressure Sensor present.

A2677 Rev 1.5 8-15