X20 Sprayer Reference Manual
The ASC option in Guidance General Setup must also be selected (see X20 Guidance manual Page
Select Off (Figure
Variable Rate Control (VRC)/Logging Mode
If you are not using VRC or Logging select Off (Figure
Select Logging Only if you are not using a VRC prescription map but are logging the Spray Rate’s elevation mapping, using the Maplink VRC software. This allows logging to be done without loading a VRC prescription map.
Select VRC and Logging if using the Maplink VRC software, to load a VRC prescription map to control the Spray Rate to a region based map. A VRC Master button will be displayed on the Guidance and Maplink VRC screens.
The only difference between Logging Only and VRC and Logging, is when Logging Only is selected, the VRC Master button is removed from the Guidance screen, to prevent confusion.
NOTICE NOTICE
When selecting Logging Only and VRC and Logging, Variable Rate Control (Maplink VRC) must be selected in the Product Selection screen during startup.
(VRC)/Logging Synchronization
When Logging Only and VRC and Logging are selected, then the VRC/Logging Synchronization window will be displayed.
www.topconpa.com |
