![](/images/new-backgrounds/1332143/33214381x1.webp)
X20 Sprayer Reference Manual
2.Mount the Shaft/Speed Sensor to an existing structure on the wheel axle, ideally in a protected position to face the magnet.
NOTICE NOTICE
The distance between the Shaft/Speed Sensor to Wheel Stud Magnet needs to be 2 to 3 mm (1/16 to 1/8 inch). The Shaft/Speed Sensor must be mounted so that the Wheel Stud Magnets pass the sensor evenly and squarely.
To mount the Shaft/Speed sensor you can either:
•Use the Mounting Bracket Assemblies (slotted brackets and angle brackets with hose clamps) provided (Figure
•Fabricate your own mounting bracket to suit the Sprayer chassis.
NOTICE NOTICE
There must be no movement of the sensor relative to the magnet.
A2677 Rev 1.5 |