INSTALLING
Continued
A.G.A.
With 1/8" NPT Tap*
Approved |
|
|
Flexible |
|
|
Gas Line | From External Regulator | |
| ||
| (11" W.C. to 14" W.C. | |
3" Minimum | Pressure) |
|
|
| Sediment |
| Tee Joint | Trap |
|
| |
| Pipe Nipple |
|
| Cap |
|
Figure 17 - Gas Connection
*Purchase the optional A.G.A.
CONNECTING FIREPLACE TO GAS SUPPLY
Installation Items Needed
•5/16" hex socket wrench or
•Phillips screwdriver
•sealant (resistant to LP gas, not provided)
1.Remove fireplace screen. Remove two screws that hold fireplace screen in place for shipping. These screws are located near top of screen. Discard screws. Lift fireplace screen up and pull out to remove.
2.Remove access door from rear or side of fireplace. See Product Identification, page 4, for access door locations.
3.Remove screws that attach log base assembly to fireplace. Carefully lift up log base assembly and remove from fireplace (see Figure 18).
CAUTION
WARNING ICON | G 001 |
Do not pick up log base assembly by burners. This could damage burners. Only handle base by grates.
Continued
Figure 18 - Removing Log Base Assembly From Fireplace
102665
17