20
INSTALLING
Continued
INSTALLING LOGS
WARNING
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.
Each log is marked with a number. These numbers will help you identify the log when installing. It is very important to install these logs exactly as instructed. Do not modify logs. Only use logs supplied with heater.
1.Slide front log (#1) into place behind front burner. Make sure tabs at bottom of log are behind front burner (see Figure 22).
2 . Slide rear log (#2) into place behind rear burner (see Figure 23).
3.Place left front branch (#4) and right front branch (#5) (24" and 30" models) or front branch (#4) (18" model) into place (see Figure 24). Make sure notches on bottom rest on grates.
Front Log (#1)
Tab
Figure 22 - Installing Front Log
Rear Log (#2)
Left Branch (#4)
Right Branch (#5)
Figure 23 - Installing Rear Log | Figure 24 - Installing Rear Log |
102665
