Abocom WUE1500 Hardware Installation, Installation of the USB Adapter for Windows 98SE/ME/2000

Hardware Installation

Installation of the USB Adapter for Windows 98SE/ME/2000

Automatically

Precaution for Windows 98SE, 2000, and ME users: If the Application setup in

Installation the Utility under

Windows98SE/ME/2000 has been

completed, follow below steps to install the hardware.

For Windows 98SE users: As you

perform the installation, have your system operating CD-ROM at hand. You may be asked to insert the OS CD-ROM for the system to download a specific driver.

1.Plug the square end (Type B) of USB cable into the adapter's USB port.

2.Plug the rectangle end (Type A) of USB cable into the PC's USB port.

3.Insert one end of your network cable into the RJ-45 network port. Connect the other end of the cable into a Hub.

After the device has been connected to your computer, Windows will detect the new hardware and then automatically copy all of the files needed for networking.

Precaution for Windows 2000 users: When Digital Signature Not Found screen appears, click Yes to continue.

- 2 -