JVC Complete Guide to Resetting and Troubleshooting Your Car Stereo - How to Reset Car Stereo and Bluetooth Pairing

Troubleshooting

	Symptom	Remedy/Cause
	Sound cannot be heard from the	Adjust the volume to the optimum level. / Make sure the unit is not
	speakers.	muted/paused. (page 6) / Check the cords and connections.
	“MISWIRING CHK WIRING THEN RESET	Check to be sure the terminals of the speaker leads are covered with
	UNIT” appears on the display and no	insulating tape properly, then reset the unit. (page 3)
	operations can be done.	If the message does not disappear, consult your JVC car audio dealer
General		or a company supplying kits.
	The unit does not work at all.	Reset the unit. (page 3)
	“F-AUX” or “R-AUX” cannot be selected.	Check the <SRC SELECT> = <F-AUX / R-AUX> setting. (page 15)
	Sound is sometimes interrupted while	Check to be sure the recommended stereo mini plug is used for
	listening to an external component	connection. (page 9)
	connected to the auxiliary input jack.
	The correct characters are not displayed	This unit can only display letters (upper case), numbers, and a
	(e.g. album name).	limited number of symbols.
FM/AM	SSM automatic presetting does not	Store stations manually.
	work.
	Static noise while listening to the radio.	Connect the antenna firmly.
	“AM” cannot be selected.	Check the <SRC SELECT> = <AM> setting. (page 15)
	Disc cannot be played back.	Insert the disc correctly.
	CD-R/CD-RW cannot be played back	Insert a finalized CD-R/CD-RW (finalize with the component which
playback	and track cannot be skipped.	you used for recording).
	Disc sound is sometimes interrupted.	Stop playback while driving on rough roads. / Change the disc. /
		Check the cords and connections.
Disc	“NO DISC” appears on the display.	Insert a playable disc into the loading slot.
	“PLEASE” and “EJECT“ appear	Press 0, then insert a disc correctly.
	alternately on the display.
	“IN DISC” appears on the display.	The disc cannot be ejected properly. Make sure nothing is blocking
		the loading slot.
	Disc cannot be played back.	Use a disc with MP3/WMA tracks recorded in a format compliant
playback		with ISO 9660 Level 1, Level 2, Romeo, or Joliet. / Add the extension
		code <.mp3> or <.wma> to the file names.
	Noise is generated.	Skip to another track or change the disc.
MP3/WMA	“READING” keeps flashing on the	A longer readout time is required. Do not use too many hierarchical
	have intended them to play.	levels and folders.
	display.
	Tracks do not play back in the order you	The playback order is determined when the files are recorded.
	The elapsed playing time is not correct.	This sometimes occurs during playback. This is caused by how the
		tracks are recorded on the disc.
USB playback	“READING” keeps flashing on the	A longer readout time is required. Do not use too many hierarchical
	display.	USB device again.
		levels and folders. / Turn off the power then on again. / Reattach the

16

ENGLISH