Maintenance
1.Wipe down the entire unit with a clean cloth. Do not use any solvents.
2.Store the unit in a clean and dry location, away from anything flammable.
3.Read and follow maintenance instructions for the engine in the Robin Subaru 6 HP Engine Maintenance Manual.
4.If water in leaking from connections during operation, shut down the Pressure Washer and retighten all connections.
Troubleshooting Tips
Symptom |
| Possible Cause |
| Solution |
Engine will not start | 1. | Gas tank empty | 1. | Fill gas tank |
| 2. | Low oil level | 2. | Add oil |
| 3. | Choke is not in correct position | 3. | Close choke |
| 4. | Engine throttle set too low | 4. | Increase throttle setting |
| 5. | Pressure build up in pump | 5. | Squeeze trigger to release pressure |
Does not produce | 1. Diameter of water supply hose too small | 1. | Replace garden hose with a ¾ inch | |
high pressure |
|
|
| hose |
| 2. | Water supply is restricted | 2. | Check water supply hose for kinks, |
|
|
|
| leaks, or blockage |
| 3. | Not enough water supply | 3. | Open water faucet all the way |
Output pressure | 1. Not enough water supply | 1. | Check water supply hose for kinks, | |
varies |
|
|
| leaks, or blockage. Open faucet all |
|
|
|
| the way |
| 2. | Water inlet screen is clogged | 2. | Remove inlet screen and rinse out |
| 3. | Nozzle is clogged | 3. | Remove nozzle and clean |
| 4. | Nozzle has mineral build up | 4. | Remove nozzle and clean with |
|
|
|
| vinegar |
SKU 91142 | For technical questions, please call | Page |